CVE-2020-23512
📋 TL;DR
The VR CAM P1 Model P1 v1 has an incorrect access control vulnerability that allows unauthenticated remote attackers to gain complete administrative control of the device via its web interface. This affects all users of this specific camera model who haven't applied security patches or workarounds.
💻 Affected Systems
- VR CAM P1 Model P1
📦 What is this software?
⚠️ Risk & Real-World Impact
Worst Case
Attackers can take full control of the camera, access live feeds, modify settings, install malware, or use the device as a pivot point into the network.
Likely Case
Unauthorized access to camera feeds and device settings, potentially leading to privacy violations and surveillance.
If Mitigated
No impact if proper authentication and network segmentation are implemented.
🎯 Exploit Status
Exploitation requires only web access to the device interface. Public technical details are available.
🛠️ Fix & Mitigation
✅ Official Fix
Patch Version: Unknown
Vendor Advisory: Not available
Restart Required: No
Instructions:
No official patch available. Check manufacturer website for firmware updates. If unavailable, implement workarounds.
🔧 Temporary Workarounds
Network Segmentation
allIsolate the camera on a separate VLAN or network segment with strict firewall rules.
Disable Web Interface
allDisable the web management interface if not required for operation.
🧯 If You Can't Patch
- Remove the device from internet-facing networks immediately
- Implement strict network access controls allowing only necessary traffic
🔍 How to Verify
Check if Vulnerable:
Attempt to access the camera's web interface without authentication. If you can access admin functions, the device is vulnerable.Check Version:
Check device web interface settings page or physical label for firmware version.Verify Fix Applied:
Verify that authentication is required for all web interface functions and that default credentials are changed.📡 Detection & Monitoring
Log Indicators:
- Unauthenticated access attempts to admin pages
- Configuration changes without authenticated sessions
Network Indicators:
- Unusual outbound connections from camera
- Traffic to camera web interface from unexpected sources
SIEM Query:
source_ip="camera_ip" AND (url_path CONTAINS "/admin" OR url_path CONTAINS "/config") AND auth_status="failed"