CVE-2018-19036
📋 TL;DR
This vulnerability allows remote attackers to execute arbitrary code on affected Bosch IP cameras via the network interface. It affects Bosch IP cameras running firmware version 6.32 or higher. Attackers can potentially take full control of vulnerable cameras without authentication.
💻 Affected Systems
- Bosch IP cameras with firmware 6.32 or higher
📦 What is this software?
Common Product Platform 4 Firmware by Bosch
View all CVEs affecting Common Product Platform 4 Firmware →
Common Product Platform 6 Firmware by Bosch
View all CVEs affecting Common Product Platform 6 Firmware →
⚠️ Risk & Real-World Impact
Worst Case
Complete device compromise allowing attackers to execute arbitrary code, disable cameras, access video feeds, pivot to internal networks, or use cameras as botnet nodes.
Likely Case
Remote code execution leading to camera compromise, video feed interception, or device integration into botnets for DDoS attacks.
If Mitigated
Limited impact if cameras are isolated in separate VLANs with strict network segmentation and access controls.
🎯 Exploit Status
Vulnerability allows remote code execution without authentication. While no public PoC exists, the high CVSS score and unauthenticated nature make weaponization likely.
🛠️ Fix & Mitigation
✅ Official Fix
Patch Version: Firmware versions after the advisory release (check specific camera model for exact version)
Vendor Advisory: https://media.boschsecurity.com/fs/media/pb/security_advisories/bosch-2018-1202-bt-cve-2018-19036_security_advisory_ip_camera_vulnerability.pdf
Restart Required: Yes
Instructions:
1. Identify affected Bosch IP camera models. 2. Download latest firmware from Bosch Security Portal. 3. Upload firmware to camera via web interface. 4. Reboot camera after update completes.
🔧 Temporary Workarounds
Network Segmentation
allIsolate cameras in separate VLAN with strict firewall rules limiting access to management interfaces.
Access Control Lists
allImplement IP-based access controls to restrict camera management interface access to authorized IPs only.
🧯 If You Can't Patch
- Segment cameras in isolated network zones with strict firewall rules blocking all unnecessary inbound traffic.
- Implement network monitoring for unusual traffic patterns or connection attempts to camera management interfaces.
🔍 How to Verify
Check if Vulnerable:
Check camera firmware version via web interface. If version is 6.32 or higher, the device is vulnerable.Check Version:
Access camera web interface and navigate to System Information or similar section to view firmware version.Verify Fix Applied:
Verify firmware version is updated to latest available version from Bosch after patch application.📡 Detection & Monitoring
Log Indicators:
- Unusual authentication attempts
- Firmware modification logs
- Unexpected system reboots
Network Indicators:
- Unusual outbound connections from cameras
- Traffic to unexpected ports
- Multiple failed connection attempts to camera management interface
SIEM Query:
source="camera_logs" AND (event_type="authentication_failure" OR event_type="firmware_change" OR event_type="system_reboot")