CVE-2024-7507
📋 TL;DR
CVE-2024-7507 is a denial-of-service vulnerability in Rockwell Automation controllers where receiving a malformed PCCC message causes the controller to fault and stop functioning. This affects industrial control systems using vulnerable Rockwell products, potentially disrupting manufacturing, energy, or critical infrastructure operations.
💻 Affected Systems
- Rockwell Automation controllers with PCCC protocol support
📦 What is this software?
Compact Guardlogix 5380 Sil 2 Firmware by Rockwellautomation
View all CVEs affecting Compact Guardlogix 5380 Sil 2 Firmware →
Compact Guardlogix 5380 Sil 2 Firmware by Rockwellautomation
View all CVEs affecting Compact Guardlogix 5380 Sil 2 Firmware →
Compact Guardlogix 5380 Sil 3 Firmware by Rockwellautomation
View all CVEs affecting Compact Guardlogix 5380 Sil 3 Firmware →
Compact Guardlogix 5380 Sil 3 Firmware by Rockwellautomation
View all CVEs affecting Compact Guardlogix 5380 Sil 3 Firmware →
Compactlogix 5380 Firmware by Rockwellautomation
Compactlogix 5380 Firmware by Rockwellautomation
Compactlogix 5480 Firmware by Rockwellautomation
Compactlogix 5480 Firmware by Rockwellautomation
Controllogix 5580 Firmware by Rockwellautomation
Controllogix 5580 Firmware by Rockwellautomation
Guardlogix 5580 Firmware by Rockwellautomation
Guardlogix 5580 Firmware by Rockwellautomation
⚠️ Risk & Real-World Impact
Worst Case
Complete shutdown of industrial processes causing production stoppage, safety system failures, or infrastructure disruption with potential physical consequences.
Likely Case
Temporary controller outage requiring manual restart, causing production delays and minor operational disruption.
If Mitigated
Isolated controller failure with redundant systems maintaining operations while affected unit is restarted.
🎯 Exploit Status
Simple malformed packet can trigger the fault; no authentication required if network access exists.
🛠️ Fix & Mitigation
✅ Official Fix
Patch Version: Check Rockwell advisory SD 1685 for specific firmware updates
Vendor Advisory: https://www.rockwellautomation.com/en-us/trust-center/security-advisories/advisory.SD%201685.html
Restart Required: Yes
Instructions:
1. Review Rockwell advisory SD 1685. 2. Identify affected controller models. 3. Download and apply firmware updates from Rockwell. 4. Restart controllers after patching. 5. Validate functionality.
🔧 Temporary Workarounds
Network Segmentation
allIsolate controllers from untrusted networks using firewalls or network segmentation
PCCC Protocol Restriction
allDisable PCCC protocol if not required for operations
🧯 If You Can't Patch
- Implement strict network access controls allowing only trusted devices to communicate with controllers
- Deploy intrusion detection systems monitoring for malformed PCCC traffic patterns
🔍 How to Verify
Check if Vulnerable:
Check controller firmware version against Rockwell's patched versions list in advisory SD 1685
Check Version:
Controller-specific command via programming software (e.g., RSLogix/Studio 5000)
Verify Fix Applied:
Verify firmware version matches patched version and test with legitimate PCCC traffic
📡 Detection & Monitoring
Log Indicators:
- Controller fault logs
- Unexpected controller restarts
- PCCC protocol errors
Network Indicators:
- Malformed PCCC packets
- Unusual PCCC traffic patterns
- Controller communication failures
SIEM Query:
source="industrial_controller" AND (event_type="fault" OR protocol="PCCC") AND packet_size:abnormal