CVE-2024-33342

7.5 HIGH

📋 TL;DR

This vulnerability allows remote attackers to execute arbitrary commands on D-Link DIR-822+ routers via command injection in the SetPlcNetworkpwd function. Attackers can gain full control of affected devices, potentially compromising network security. Only D-Link DIR-822+ V1.0.5 users are affected.

💻 Affected Systems

Products:
  • D-Link DIR-822+
Versions: V1.0.5
Operating Systems: Embedded Linux
Default Config Vulnerable: ⚠️ Yes
Notes: Affects the web management interface accessible via LAN/WAN. No authentication bypass required.

📦 What is this software?

⚠️ Risk & Real-World Impact

🔴

Worst Case

Complete device takeover leading to network compromise, data exfiltration, lateral movement to other devices, and persistent backdoor installation.

🟠

Likely Case

Router compromise allowing traffic interception, DNS manipulation, credential theft, and use as attack platform.

🟢

If Mitigated

Limited impact with proper network segmentation, firewall rules, and monitoring in place.

🌐 Internet-Facing: HIGH
🏢 Internal Only: MEDIUM

🎯 Exploit Status

Public PoC: ⚠️ Yes
Weaponized: LIKELY
Unauthenticated Exploit: ✅ No
Complexity: LOW

Exploit requires network access to web interface but no authentication. Public PoC available in GitHub repository.

🛠️ Fix & Mitigation

✅ Official Fix

Patch Version: Unknown

Vendor Advisory: http://www.dlink.com.cn/techsupport/ProductInfo.aspx?m=DIR-822%2B

Restart Required: Yes

Instructions:

1. Check vendor website for firmware updates. 2. Download latest firmware. 3. Access router web interface. 4. Navigate to firmware update section. 5. Upload and apply new firmware. 6. Reboot router.

🔧 Temporary Workarounds

Disable Remote Management

all

Prevent external access to web management interface

Network Segmentation

all

Isolate router on separate VLAN with restricted access

🧯 If You Can't Patch

  • Replace with supported hardware
  • Implement strict firewall rules blocking access to router management interface

🔍 How to Verify

Check if Vulnerable:

Check firmware version in router web interface under System Status or Administration

Check Version:

curl -s http://router-ip/status.cgi | grep firmware

Verify Fix Applied:

Verify firmware version is newer than V1.0.5

📡 Detection & Monitoring

Log Indicators:

  • Unusual POST requests to /prog.cgi with shell metacharacters
  • Multiple failed login attempts followed by successful access

Network Indicators:

  • Unusual outbound connections from router
  • DNS queries to suspicious domains
  • Port scans originating from router

SIEM Query:

source="router-logs" AND (uri="/prog.cgi" AND (method="POST" AND (content="|" OR content=";" OR content="`")))

🔗 References

📤 Share & Export